Triplett 9007 Manuel d'utilisateur télécharger pdf (Page 40)

Page 39

9.1 Replacing Battery:

9.1.1 Remove the test leads from the meter.

9.1.2 Remove 1 screw from the top of the battery compartment

cover. Flip the Stand out and remove the screw from the bottom

of the battery compartment cover. The cover is sealed and may

t tightly. A small screwdriver inserted at the top of the cover

may help to remove it.

9.1.3 Remove the 9 volt battery and, observing proper polarity,

replace with a fresh battery (PN 37-48).

9.1.4 Reassemble battery compartment cover. Reinstall screws.

9.1.5 Verify that the meter operates properly before using it to make

measurements.

9.2 Replacing Fuses:

9.2.1 Remove the test leads from the meter.

9.2.2 Remove the 4 screws from the back of the meter case. Flip up

the Stand and remove 2 additional screws. It is not necessary

to remove the battery cover screws.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Pas de commentaire

Triplett 9007 Manuel d'utilisateur Page 40