Triplett 9055 Manuel d'utilisateur télécharger pdf (Page 32)

Measuring Temperature (Room)

1. Place meter in the location to be measured. Allow meter

to set in this location for at least 1 hour.

2. Set the Function Switch to any position other than OFF.

3. Read Room Temperature from the LCD.

Note:

Select °C or °F readout using the “°C / °F Room “ Button.

Measuring Temperature (using probe)

1. Insert the black plug of the temperature probe into the

COM jack and red plug into the " V/Hz%/Ω/Cap/

Temp "

jack.

2. Set the Function Switch to °C or °F as desired.

3. Touch the tip of the probe to the object to be measured.

4. Read the temperature on the LCD.

Notes:

The included probe can measure up to approximately 300 °F

without damage. To measure higher temperatures, use a

high temperature probe.

If the ambient temperature of the meter is changed suddenly,

the meter may display erroneous readings until the meter

reaches the same temperature as its surroundings.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

Pas de commentaire

Triplett 9055 Manuel d'utilisateur Page 32