Triplett 3022 Fiche technique télécharger pdf (Page 8)

DO NOT TOUCH

Do not touch exposed wiring, connections or other

“live” parts of an electrical circuit. If in doubt, check

the circuit first for voltage before touching it.

Turn off the power to a circuit before connecting test

probes to it. Be sure there is no voltage present be-

fore you touch the circuit. Do not use cracked or bro-

ken test leads.

HIGH VOLTAGE IS DANGEROUS

Always start with the power off. Be sure there is no

voltage present before making connections to the cir-

cuit.

Don’t touch the tester, its test leads, or any part of the

circuit while it is on.

Before disconnecting the tester, turn the circuit off and

wait for the meter to return to “zero.”

DISTRIBUTION CIRCUITS PACK A PUNCH

In high energy circuits such as distribution transform-

ers and bus bars, dangerous arcs of explosive nature

can occur if the circuit is shorted. If the tester is con-

nected across a high energy circuit when set to a low

resistance range, a current range, or any other low

impedance range, the circuit is virtually shorted.

Special equipment designed for use with these circuits

is available. Contact a qualified person for assistance

before attempting to make measurements on any high

energy circuit.

SAFETY IS NO ACCIDENT

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Pas de commentaire

Triplett 3022 Fiche technique Page 8