Triplett 3022 Fiche technique télécharger pdf (Page 7)

• Do not mistake a downscale reading as an indication that no

potential is present. Dangerous potentials may be present

that may result in user injury.

• When replacing the battery, dispose of the depleted battery

in accordance with any prevailing safety or environmental

regulations.

• A static charge on the face of the meter may cause the

meter to produce inaccurate readings, which could lead to

user injury. This condition is usually observed in dry

climates, when the face of the meter is rubbed with a cloth.

Apply Antistat solution, or mild detergent, to the face of the

meter to dissipate the static charge.

READ THE MANUAL

Read this Instruction Manual carefully and completely.

Voltages and currents within the capability of this test

equipment can be hazardous. Follow the instructions

in this manual for every measurement. Read and un-

derstand the general instructions before attempting

to use this tester. Do not exceed the limits of the tester.

SAFETY CHECK

Double check the switch setting and lead connections

before making measurements. Are you following all

of the instructions?

Disconnect the tester or turn off the power before

changing switch positions. Do not connect to circuits

with voltage present when switch is in any ohms or

current position.

When replacing fuses, use only specified type fuses

and insert in correct fuse holder.

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Pas de commentaire

Triplett 3022 Fiche technique Page 7