Triplett 3274 Fiche technique télécharger pdf (Page 11)

Continuity Testing

The WireMaster Coax can be used as an audible and visual Continuity tester. To use

this feature, the user will need to purchase or make a simple BNC / Clip Lead adaptor.

(Triplett PN: 79-792)

Connect the adaptor cable to the BNC on the WireMaster Coax. When a circuit with

Continuity is connected between the adaptor’s clip leads, the product’s SHORT / CON-

TINUITY LED will light and the beeper will sound.

Intermittent Connections

The WireMaster Coax performs tests in real-time. That is, it is continuously testing the

target cable for the presence of a Remote (some products only perform a momentary

test). When a cable is suspected of having an intermittent connection, a Remote can be

connected to one end of the cable, and the WireMaster Coax connected to the opposite

end of the cable. The appropriate numbered ID LED should light on the WireMaster

Coax. Flex the cable at its connectors and along its length (may require 2 people) while

observing the ID LED on the WireMaster Coax. If an intermittent connection is found,

the ID LED will flicker or change value (like to SHORT or OPEN).

Included Items

The following items are included with the WireMaster Coax

Remote 1 ……………………………... Triplett PN: 3274-1

Remote 2 ……………………………... Triplett PN: 3274-2

Remote 3 ……………………………... Triplett PN: 3274-3

Remote 4 ……………………………... Triplett PN: 3274-4

Remote 5 ……………………………... Triplett PN: 3274-5

Remote 6 ………………………….….. Triplett PN: 3274-6

Remote 7 ………………………….….. Triplett PN: 3274-7

Remote 8 ……………………………... Triplett PN: 3274-8

Carrying Case with Foam Insert …….... Triplett PN: 10-4293

Male BNC to BNC Adaptor …………..... Triplett PN: 13838

Also Available:

BNC to Alligator Clip Lead .................... Triplett PN: 79-792

1 2 ... 6 7 8 9 10 11 12 13 14

Pas de commentaire

Triplett 3274 Fiche technique Page 11